6
BF-DM-C-MM G332-EN October 2019
The size of the standard tool for our company: outer diameter 17.7 and length 63. Tightening torque
requirment: 35 N.m.
Please pay attention to the direction of the cables coming out of the frame and from the motor. Please note that
the cables should not be squashed when the motor is attached to the frame.
6.3.3 Cabling
Please note: all cables can only be connected to its corresponding counterpart. Each connector is different so
there is no possibility to get the cables mixed up, all cables can only fit into one connector.
6.3.3.1 Connection of the battery cables to the motor
The female connector
(negative) from the motor
The male connector (positive)
from the motor
The male connector (negative)
from the battery
The female connector (positive)
from the battery
A
a
B
b
Please connect the negative connectors from the motor and battery together.
Please connect the positive connectors from the motor and battery together.
6.3.3.2 Connection of the EB-BUS to the motor
The male connector from
the motor
The female connector from
the EB-BUS cable
A
a
Please connect the connectors from the motor and EB-BUS cable together.
