BAFANG DPC-10 Biktrix, Manual

Page: 8 / 8

ERROR CODE DEFINITION
The DP C10.UART display can show
e-bike faults. When a fault is
detected, the icon will be
displayed. In the speed field one
of the following error codes will be
displayed. If you cannot
troubleshoot the error and resolve
the issue contact Biktrix support.
warning interface
Error Code Error Definition Trouble-shooting Method
“04”
Throttle has not returned to
neutral position
Check if throttle has returned to neutral position,
unplug throttle and plug back in
“05”
Throttle Fault Check the throttle
“07”
Overvoltage Protection Check the battery voltage
“08”
Motor hall signal cable fault Check the motor module
“09”
Motor phase cable fault Check the motor module
“11”
Controller temperature sensor
failure
Check the controller
“12”
Current sensor failure Check the controller
“13”
Battery temperature fault Check the battery
“14”
Motor temperature fault Check the motor
“21”
Speed sensor fault Check installation position of speed sensor
“22”
BMS communication fault Replace the BMS or battery
“30”
Communication fault Check the controller connection