PARAMETER SETTING
●
Items to be Set
1
〉
Data reset
2
〉
Km/mile
3
〉
Light sensitivity
4
〉
Display backlight brightness
5
〉
Automatic off time
6
〉
Maintenance warning settings
7
〉
Check wheel diameter
8
〉
Speed Limit Setting
9
〉
Speed model
10
〉
Battery information
●
Setting Preparation
1) When the display is active, press
the
button twice. The system will
enter the MENU parameter setting
state, in which the display parameters
can be set. Press
twice again to
return to the main menu
.
2) If no operation is performed for 10
seconds, the display will return to the
normal view.
3) In the parameter setting state, when
the parameter you want to set begins to
flash, press the
/
buttons to adjust
the parameter value. Press the
button to switch between the
parameters to be set. Press
twice
to exit the submenu.
●
Data reset
Press
twice and the display will
enter the MENU state. In the speed
field tC will be displayed. If you press
/
a "y" will be also displayed. Now all
temporary data, e.g. maximum speed
(MAXS), average speed (AVG) and
single trip distance (TRIP) can be
cleared. Press the
button to enter
the km/mile setting interface
.
If the user does not reset the data, the
single trip distance and the accumulated
total riding time will be automatically
cleared when the accumulated total
riding time exceeds 99 hours and 59
minutes.
* The data will not be cleared when the
display’s light-sensing function is set to
0 or when it is switched off!
●
Km/mile
When the speed field displays S7, press
the
/
buttons to switch between
km/h and mph as well as setting km or
miles. After changing this setting, press
the
button to enter the option for
light sensitivity. The default display unit
is km.
●
Light Sensitivity
When the speed field displays bL0, press
the
/
buttons to choose a value
between 0 and 5. The higher the chosen
value, the higher the light sensitivity.
