background image

12

DISPLAY MANUAL 

DP C240.CAN   

to the “Sensitivity”. Press and hold “+” and 
“-” synchronously to save and exit back to 
the main interface, or you can also select 
“BACK” 

 “EXIT” to exit back to the main 

interface.

Notice: “0” means light sensor is off. Level 
1 is the weakest sensitivity and level 5 is the 
strongest sensitivity.

 

Trip reset - to clear the single trip 
distance

Briefly press “+” or “-” to go to “TRIP Reset”, 
and then briefly press ”ON/OFF” to switch 
between NO”/“YES” (“YES”- to clear, “NO”-
no operation), then briefly press ”ON/OFF” 
to confirm selection; After confirmation, 
briefly press ”ON/OFF” again to save the set-
ting and exit back to the “TRIP Reset”. Press 
and hold “+” and “-” synchronously to save 
and exit back to the main interface, or you 
can also select “BACK” 

→ 

“EXIT”to exit back 

to the main interface.

Notice: The riding time(TIME), average speed 
(AVG) and maximum speed (MAXS) will be 
reset simultaneously when you reset TRIP.

 

Vibration setting

Briefly press “+” or “-” to go to “Vibration”, 
and then briefly press ”ON/OFF” to select 
between ON and OFF (ON means vibration 
button is on; OFF means vibration button is 
off), then briefly press ”ON/OFF” to confirm 
selection and save the setting and exit back 
to the“Vibration”. Press and hold “+” and 
“-” synchronously to save and exit back to 
the main interface, or you can also select 
“BACK” 

→ 

“EXIT” to exit back to the main 

interface.

 

Wheel size review

After entering into “Information” menu, 
then briefly press “+” or “-” to go to ” Wheel 
Size”, and then briefly press ”ON/OFF” to 
review the wheel size default, then briefly 
press ”ON/OFF” to exit back to the “Wheel 
Size”. Press and hold “+” and “-” synchro-
nously to exit back to the main interface, or 
you can also select “BACK” 

→ 

“EXIT” to exit 

back to the main interface.

 

Speed limit review

After entering into “Information” menu, 
then briefly press “+” or “-” to go to ” Speed 
Limit”, and then briefly press ”ON/OFF” to 
review the speed limit default, hen briefly 
press ”ON/OFF” to exit back to the “Speed 

Summary of Contents for DP C240.CAN

















Reviews: