background image

CE ORIGINAL MANUAL    

 

 

 

 

       

                     LACROS BAFANG LCD DISPLAY

 

 

 

 

 

 

 

   

                     

 

         VERSION CE 1.2 EN 

 

 

For your safety 

 

Your safety is very important, so read the following safety advices carefully. More safety tips are listed 
further in the manual: 

 

1.

 

The LACROS Electric bike is equipped with an electromotor. It is very important that you are familiar with 
the bike as soon as possible. We advise you to choose the first "practice rides" for easy roads with little 
traffic and a smooth road surface. 

2.

 

When you want to ride, do not stand on the pedal, but first sit on the saddle and then start pedaling. 

3.

 

Ride the first rides preferably without electrical support to get familiar with your bike. After this you can 
start with a low setting (motor support). 

4.

 

The LACROS bicycles have been tested by our employees. If you have any doubts about the bicycle 
and/or the electrical installation of the bicycle, please contact us immediately. 

5.

 

Never expose the battery and the charger directly in the sun or heat surfaces. The battery is protected 
against heat, but heating is better avoided.  

6.

 

Never use a charger other than the one supplied by Shinga B.V. It is very important for your safety to 
always use the original charger. 

7.

 

The brakes are equipped with an "ABS" protection. As a result, the support stops when you use the 
brakes. 

8.

 

We recommend wearing a helmet while cycling. 

The LACROS bicycles are delivered in accordance with the most recent European guidelines (page 3), if you 
have any questions or comments, do not hesitate to contact us. 

We are always available for users of LACROS bicycles:  

E-mail: [email protected] 

Phone: +31 73 203 2487 

 

Thank you for your trust, 

 

 

 

Ton van den Oetelaar 

Director Shinga BV 

 

 

 

Summary of Contents for C966














Reviews: