BAFANG C965, Manual

Page: 14 / 18

9.1 Display will display symbol MAINTAIN when the ODO accumulated more than
setting mileage (this parameter can be set by dealers), the mileage symbol will flash for
4 seconds when the display power on, the buzzer beep for 2 seconds at the same time.
9.2 Display will display symbol MAINTAIN When the battery cycle over setting times,
the symbol of battery will flash for 4 seconds when the display power on, the buzzer
beep for 2 seconds at the same time.
You can shutdown maintain reminding message by parameter setting. Parameter setting
->Maintain reminded
（
MA
）
->0
10 Error Code define
800U can give warning when E-bike has error, LCD display error icon and error code in
speed position, Error code from 01H~30H , definition see the table below.
Error Code Error description Error display
0x01 Normal No error
0x03 Brake signal No error
0x04 Throttle on high position Beep for 1 second, display 04H on speed position
0x05 Throttle error Beep for 1 second, display 05H on speed position
0x06 Low voltage protection Beep for 1 second, display 06H on speed position
0x07 High voltage protection Beep for 1 second, display 07H on speed position
0x08 Line of the Hall on motor error
Beep for 1 second, display 08H on speed position
0x09 Phase line of the motor error Beep for 1 second, display 09H on speed position
0x10 High temperature of controller Beep for 1 second, display 10H on speed position
0x11
Controller’s temperature
sensor error
Beep for 1 second, display 11H on speed position
0x12 Current sensor error
Beep for 1 second, display 12H on speed position
0x13
Battery’s temperature sensor
error
Beep for 1 second, display 13H on speed position
0x14 Motor‘s temperature sensor Beep for 1 second, display 14H on speed position
14