background image

3

    BF-UM-C-BT F03-EN November 2019

USER MANU

AL FOR BA

TTER
Y

Do not intentionally short-circuit the 
battery. 

 

Never allow the plus and minus connectors to 
come into contact with each other. Do not 
allow the battery to come into contact with 
metal objects. It is dangerous if the battery is 
short-circuited.  As it can lead to overheating, 
smoke, explosion or burning.

Do not heat or burn the battery. 

An overheated or ignited battery can cause 

battery cells to explode.

Do not use the battery near heat sources. 

Do not use the battery near an open flame or at 

temperatures above 60 °C. High temperatures 
can cause the battery to burn or explode.  

Do not charge the battery near open fire 
or in direct sunlight. 

This can cause errors or internal problems inside 
the battery, also damaging the protective 
function. It can lead to abnormal chemical 
reactions or malfunctions that lead to 
overheating, smoke and explosion.

Do not damage the battery.

 

The battery must not be dropped or damaged.  

This can lead to overheating, smoke and 
explosion. Never submerge the battery in water.

Do not charge the battery directly from 
the socket or a cigarette lighter in the car.  

High voltage and excessive current will damage 
the battery and reduce its lifespan. It can lead to 
overheating, smoke and explosion.

8.1.1.2 Battery Storage

If you do not use your pedelec for a long time, 
remove the battery, and charge about (60-80%) 

on. Store the battery separately in a suitable dry 
place.

 

Avoid direct sunlight from the sun, as it may 
cause it to overhead, and cause internal 
problems in the battery. It can lead to abnor-
mal chemical reactions or malfunctions that 
lead to overheating, smoke and explosion.

 

To prevent a deep discharge, the battery is 
put into sleep mode after a certain time.

 

Do not extend the battery to temperatures 
below the permissible storage temperature 
of -10 °C to 35 °C. Note that temperatures 
of about 45 °C are common near heaters, 
in direct sunlight or in overheated vehicle 
interiors.

Do not continue to use the battery if you notice 
that it gets hot during operation, charging or 

storage, develops a strong smell, changes its 
appearance, or is otherwise unusual. Do not 
continue to use the battery and have it checked 
by a retailer before using it again.

8.1.1.3 Battery wear

The battery can be charged 500 times. The 
battery capacity decreases during this time, thus 

reducing the range of the pedelec.  If the range 
is not enough depending on the capacity of the 
battery may need to be replaced.

8.1.1.4 Pedelec riding distance

It is best to charge the battery at room 
temperatures and insert the battery just before 

the start of the journey. The discharge cycle of 
the battery can be affected by:

 

Used pedal power

 

Total weight (load and driver)

 

Tire air pressure

 

Headwind

 

Ambient temperature

 

Road/underground condition

 

selected speed level

 

Slope

 

Battery charge level

 

Age

 

Remaining capacity of the battery

Summary of Contents for BT F03.450.UC









Reviews: