Baer DLX User Manual Download

Page: 90 / 178

PC-Card

11.1

Permitted PC-Card's

•

Standard:

JEIDA/PCMCIA

•

Type:

SRAM battery backed
Flash Memory-Card (AMD, D Series)

•

Capacity:

up to 4MByte

11.2

Treatment advice for PC-Cards

Noncompliance with the following advice can lead to destruction of
the PC-Card.

•

Do not bend or fold the PC-Card or subject it to similar conditions.

•

Do not drop the PC-Card.

•

Always keep the PC-Card dry and free of dust.

•

Do not expose the PC-Card to high temperature or high humidity.

•

To avoid static charges, always store the PC-Card in its original packing
when it is not in use.

•

Do not touch the connections of the PC-Card.

•

Never use force when inserting a PC-Card. Only insert the card into slots
designed for them.

•

Do not remove the PC-Card from the unit until it has been deactivated.

Summary of Contents for DLX



















































































































































































Search results

Summary of Contents for DLX

Reviews:

Related manuals for DLX

Brands by name

Popular brands

Baer DLX, User Manual

Search results

Summary of Contents for DLX

Reviews:

Related manuals for DLX

Brands by name

Popular brands