Installation and operation manual
•
Version RCM-10/03-e
Programming Page
15/18
7.3.6 Output response programming
This menu selection programs response time of the
meter. Use the up arrow to move the > prompt to the
change location on the screen, then press the right
arrow key to select the next menu.
Use the up or right arrow to adjust the response
between slow, medium and fast. Use the fast setting
for velocities > 2 fps and applications that have low
flow noise and require quick batching. Use the
medium setting for normal applications. Use the slow
setting for low velocity or high flow noise
applications.
To save the value, press the Enter key. This action
will automatically move back to the units menu.
Pressing the End key again will move to the main
menu.
Use the up arrow key to move to another set of
menus or press the End key to move to the main
display
