background image

5

License Requirements

This device complies with Part 15 of FCC
Rules. Operation of this device is subject to
the following conditions: (1) This device may
not cause harmful interference, and (2) this
device must accept any interference received,
including interference that may cause
undesired operation.

No FCC license is required by a utility to
operate a Badger ORION meter reading
system.

Any changes made, but not approved by
Badger Meter, can void the user’s authority to
operate the equipment.

Note Explanations

NOTE:

 

Communicates installation, operation, or

maintenance information that is safety related but
not hazard related.

Scope of Manual

This manual contains installation instructions
for mounting the 

Badger

®

 ORION

®

 Integral

Transmitter for Gas Meters

 on two American

Gas Meters.

Proper performance and reliability of the
Badger ORION system depends upon
installation in accordance with these
instructions.

Product Unpacking and Inspection

Upon receipt of the product, perform the
following unpacking and inspection
procedures:

NOTE:

 

If damage to the shipping container is

evident upon receipt, request the carrier to be
present when the product is unpacked.

Carefully open the shipping package, follow
any instructions that may be marked on the
exterior.  Remove all cushioning material
surrounding the product and carefully lift the
product from the package.

Retain the package and all packing material
for possible use in reshipment or storage.

Visually inspect the product and applicable
accessories for any physical damage such as
scratches, loose or broken parts, or any other
sign of damage that may have occurred
during shipment.

NOTE:

 

If damage is found, request an inspection

by the carrier’s agent within 48 hours of delivery
and file a claim with the carrier. A claim for
equipment damage in transit is the sole
responsibility of the purchaser.

Summary of Contents for Orion 64989-002

















Reviews: