Installation Manual
OVERVIEW
This manual contains installation and programming instructions for the GALAXY® II gateway receiver .
Proper performance and reliability of the gateway receiver depends upon installation in accordance with these instructions .
Product Description
The GALAXY II gateway receiver (“gateway”) is an easy-to-install, easy-to-deploy unit that collects metering data from the
GALAXY TR3 meter endpoints in the area . The gateway uses a cellular or LAN network backhaul to send the requested
metering data back to the utility where the data can be used to better manage the utility's operation and provide important
data for improved customer service and utility operations . The ReadCenter® reading data management software manages this
data transfer process and includes many tools and standard reports, as well as the ability to create user-defined reports .
License Requirements
This device complies with section 15 and 247 as an unlicensed transmitter and as a part 15 unintentional radiator .
This device complies with part 15 of the FCC Rules . Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation .”
In accordance with FCC regulations, “Code of Federal Regulations” Title 47, Part 2, Subpart J, Section 1091, transmitters pass
the requirements pertaining to RF radiation exposure . However, to avoid public exposure in excess of limits for general
population (uncontrolled exposure), a 20-centimeter distance between the transmitter and the body of the user must be
maintained during testing .
No FCC license is required by a utility to operate a GALAXY II gateway system .
This device complies with Industry Canada license-exempt RSS standard(s) . Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device .
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence .
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre
le fonctionnement .
MPORTANT
I
Changes or modifications to the equipment that are not expressly approved by Badger Meter could void the user’s
authority to operate the equipment. Only properly trained and authorized personnel should install and/or maintain
this equipment.
Product Unpacking and Inspection
Upon opening the shipping container, visually inspect the product and applicable accessories for any physical damage such
as scratches, loose or broken parts, or any other sign of damage that may have occurred during shipment .
OTE:
N
If damage is found, request an inspection by the carrier’s agent within 48 hours of delivery and file a claim with the
carrier . A claim for equipment damage in transit is the sole responsibility of the purchaser .
Page 5
February 2014
