Badger Meter FC-5000, User Manual

Page: 18 / 44

Operator Interface
Icon Functionality
Depending on the task you are performing, one or more of the following icons
may appear on the screen� To activate an icon, press the F unction key (F1, F2, F3 or
F4) directly under the icon�
Icon Function
Display the Home screen or cancel an edit (if you activate it without
saving first)
Display the menu structure
Create a custom label (name) for unit of measure
Return to Setup menu
Cycle through alpha characters
Enter a decimal point
Cycle through special characters
Reveal raw and calculated info/sensor data for the flow computer
BACKSPACE (Reject) key
ENTER (Accept) key
Enter frequency-in-hertz calibration data
Enter K-factor in multi-point calibration table
Clear the selected value
Enter conversion factor for custom unit of measure
Change selected value to positive ( + ) or negative ( – )
Enter viscosity value
Enter frequency-over-viscosity value on multi-point calibration table
Enter density value
Set totalizer rollover point
Appears on Home screen if relay is triggered; informational only
Table 2: Icon functionality
Page 18 July 2016 CTL-UM-01723-EN-01