ABOUT THIS MANUAL
This manual contains information concerning the installation, operation and maintenance of the Badger Meter® ER-10,
ER-10/R (Remote) and ER-10H electronic registers .
Installing, wiring and programming these units is fairly simple and straightforward . This manual provides you with a step-by-
step guide for this purpose .
Examples are provided only to illustrate the programming function . Your specific application will most likely require a
different set of numbers for proper programming .
The troubleshooting section lists the most common problems that can be encountered, their most likely cause and the
recommended solution . If a problem persists, please contact our technical support group at:
Badger Meter, Inc .
Customer Service
1-800-876-3837
PRODUCT DESCRIPTION
The ER-10, ER-10/R and ER-10H are external or battery powered electronic registers that display rate of flow and total flow .
They have independent programmable scale factors for rate and totalization, allowing you to program these displayed values
in different but meaningful engineering units, such as gallons per minute and total gallons .
The LCD display with 8 digits for total, and 4 digits plus legend for rate, provides easy viewing at a glance . For conditions
where ambient light is poor, the display can be backlit by connecting an external DC (10…30V DC) power supply . A single unit
can accept NPN or dry contact inputs for low or high speed applications .
These registers are powered by one 3V Lithium battery each .
Setup is quick and easy . Use the two front panel keys to scroll and preset the values in all
Program Modes
.
About This Manual
Page 5
September 2017
REG-UM-00471-EN-07
