1.6/0506
The table can be assembled by one person. Having a second person available to help
can speed things along. Don’t fully tighten the bolts until the table is completely
assembled. Then go back and tighten them securely, but don’t overtighten.
Page 2 of 4
STEP 1:
See PICTURE 1. Insert the SIXTEEN BLACK PEGS (A) into the 16 peg holes on the ends of
the TWO TOP RAILS (B) and the SIX SHELF RAILS (C).
Push the thinner end of the peg (as shown by Part B) into the hole until the wider end is flush with
the wood (as shown on Part C).
PICTURE 3
D
B
C
C
C
B
D
C
C
C
PICTURE 2
STEP 2:
See PICTURE 2. Attach ONE TOP RAIL (B) and THREE SHELF RAILS (C) to ONE END
PANEL (D) using FOUR
1¾”
BOLTS (E).
Insert the black pegs on the RAILS (B, C) into their pre-drilled holes on the END PANEL (D) to
line up the other holes for the BOLTS (E).
The shelf grooves on the SHELF RAILS (C) should face in and line up with the shelf grooves on
the END PANEL (D).
STEP 3:
See PICTURE 3. Attach the second TOP RAIL (B) and the remaining THREE SHELF RAILS
(C) to the same END PANEL (D) using FOUR
1¾”
BOLTS (E).
PICTURE 1
B
C
A
A