Bad Boy Outlaw XP 5400, Owner'S, Service & Parts Manual, Page: 36 / 64

PAGE
36
Leveling the Deck
1)
Start on a flat level surface and set the air pressure
in all four tires to 12 psi.
2)
Get two 2x4s and make sure that the wider sides
are similar length.
3)
Take off the foot pedal and raise the floor
plate.
4)
Lower the deck onto the 2x4s and pin the deck into
its top available height. Remove the dampener that
attaches to the actuator bar using two ½”
wrenches.
5)
Now ensure that the deck is level left to right and
has a pitch down of ¼” from the back to the front.
This can be done by adjusting the tabs on the
deck.
6)
Loosen the bolts on the back of the deck using two
¾” wrenches until the deck hanger is resting
against the bolt.
7)
Adjust the front deck hanger until there is ¼” gap
between the deck hanger and the bolt that it rests
on.
8)
Reattach the dampener to the actuator bar.
9)
Place the floorplate down and place the foot pedal
back on and you should be ready to mow.