background image

SECTION 8:

 MOVING INOPERABLE MOWER

8.1  Do not tow machine. Use a winch to load on a trailer for transporting.

8.2 

ATTENTION: RETURN BYPASS VALVES TO OPERATING POSITION BEFORE RUNNING 
MOWER FOLLOWING REPAIRS. 

8.3  MZ Models are equipped with two neutral engage/disengage arms, located at the rear of 

the mower protruding from the frame and under the muffler. By pulling the arms out the 
mower can be put in a neutral position. Return the arms to the “forward position for normal 
operation.

Your Bad Boy Mower Weighs:  

MZ SERIES: 

585—602 lbs

 

 

 

*** Weights fluctuate with the addition of accessories. 

8.5  As you can see by the weights of the machines, you shouldn’t ever try to push or pull a Bad 

Boy Mower by hand. This could cause serious bodily injury. 

8.6   Hopefully, you’ll never need to use this section of the manual. However, if you do, use 

extreme caution when moving machine!

SECTION 9:

 INSTRUMENTATION 

9 .1 

Electronic Hour Meter—Registers Hour increments up to 9,999.9 total hours. This meter 
records the cumulative time the engine is running. 

PAGE  13

Summary of Contents for MZ Series













































Reviews: