Bad Boy MZ MAGNUM, Owner'S, Service & Parts Manual

Page: 25 / 60

3.1 Changing your engine oil and oil filter
1) Remove oil dipstick and open oil drain using a 10 mm
socket or a flat head screwdriver until oil begins flowing.
Allow oil to completely drain. (Make sure to have an oil
pan ready to capture old
oil and properly dispose old oil.)
2) The oil filter is located on the right side of the engine.
Clean area around oil filter. Place a container under the
oil filter to capture
any oil and remove filter. Wipe off
mounting surface and reinstall drain
plug. Torque to 10 ft*lb.
3) Place new filter in shallow pan with
open end up. Fill with new oil until oil reaches the
bottom of the threads.
Allow 2 minutes for oil to be absorbed
by filter material.
4) Apply a thin film of clean oil to rubber gasket on new
filter
5) Refer to instructions on oil filter for proper installation.
6) Fill crankcase with approximately 2 quarts of new oil.
Level should top of indicator on dipstick.
7) Reinstall oil fill/dipstick and tighten securely.
8) Start engine; check for oil leaks. Stop Engine;
correct oil leaks. Recheck oil level
9) Dispose of used oil and filter in accordance
with local ordinances.
Page 25
Kawasaki FR651V
This machine has an oil drain
hose installed on the engine to allow for easier oil
changes. Bad Boy recommends that the oil and filter
be changed at intervals of 50 usage hours or yearly,
whichever occurs first. The oil capacity is 2
quarts. Bad Boy 10W-30 synthetic blend engine oil
is recommended for maximum protection.