PAGE 22
1500CC DIESEL
(CONTINUED)
When servicing the fuel system on the Diesel, it is
necessary to purge the air from the system by loosening
the 9/16˝ bolt on top of the fuel filter and pumping the fuel
bulb (located underneath the radiator) until air bubbles
are no longer visible.
CHANGING YOUR FUEL FILTER
1.
Your 1100cc Diesel has two fuel system filters.
The first is a filter/water separator.
2.
Open the drain on the bottom of the filter/water
separator. Catch the draining fluid in a suitable
container. Dispose of the drained fluid correctly.
3.
Close drain.
4.
The second fuel filter is a canister located above
the fuel/water separator.
5.
Close the fuel supply valve.
6.
Clean the outside of the fuel filter assembly.
7.
Remove the filter housing bolt from the bottom of
the filter.
8.
Remove the canister. Ensure that any fluid is
drained into a suitable container.
9.
Assemble the following items: seals (8), seal (7),
canister (3), and bowl (10). Place washer (5) and
seal (6) on setscrew (2).
10.
Fasten the assembly to the fuel filter base with
housing bolt (2).
11.
The fuel system will need to be primed after the
new filter is installed. Refer to air purging
instructions at top of page.
.
Summary of Contents for Mowers DIESEL 1500cc
Page 25: ...PAGE 25 ELECTRICAL SYSTEM CONTINUED WIRING DIAGRAM...
Page 31: ...PAGE 31...
Page 54: ...PAGE 54...
