Bad Boy 4025H 2021 Page 90 Operator'S Manual Download

Page: 90 / 128

OPERATION

CAUTION

•

Always check if there’s no in-

terference with the implement,

quick-coupler of the imple-

ment, and other attachments

when attaching to the 3-point

hitch to avoid fatal personal in-

jury or machinery damage.

1. To let the implement float along

contour of the ground, turn the

rectangular steel plate to the verti-

cal position.

2. To secure the implement, turn the

rectangular steel plate to the hori-

zontal position.

ADJUSTMENT OF VERTICAL

HEIGHT

(1) Rectangular steel plate

ADJUSTMENT OF CHECK BAR

1. For implements such as a plow

and disc harrow, adjust the length

so that it can be moved for 5 - 6

cm sideways.

2. For implements such as a rotary

tiller and mower, adjust the length

so that it cannot be swayed side-

ways.

(1) Stabilizer

4025h_4035h.indb 21

2020-09-18 오후 6:23:18

Summary of Contents for 4025H 2021

































































































































Search results

Summary of Contents for 4025H 2021

Reviews:

Related manuals for 4025H 2021

Brands by name

Popular brands

Bad Boy 4025H 2021, Operator'S Manual

Search results

Summary of Contents for 4025H 2021

Reviews:

Related manuals for 4025H 2021

Brands by name

Popular brands