Bad Boy 4025H 2021 Page 79 Operator'S Manual Download

Page: 79 / 128

BAD BOY TRACTOR

STOPPING

1. Stop the tractor with the brake

pedal and clutch pedal.

2. Put the shuttle shift lever to the

neutral position.

3. Put all SCV levers to the neutral

position.

4. Set the PTO switch in the OFF po-

sition.

5. Lower all implements on the

ground.

6. Push the hand throttle lever back

slowly to decelerate the engine

and keep the engine for 1 - 2 min-

utes of unloaded idling.

7. Make sure the parking brake is

applied.

8. Turn the main switch to the

「

OFF

」

position to stop the en-

gine.

CAUTION

•

When leaving the tractor, put

the shuttle shift lever into the

neutral position. If not, the

tractor may move even though

the engine is stopped.

5. Release the parking brake. It can

be released by depressing the

brake pedal firmly.

(1) Parking brake lever

4025h_4035h.indb 10

2020-09-18 오후 6:23:17

Summary of Contents for 4025H 2021

































































































































Search results

Summary of Contents for 4025H 2021

Reviews:

Related manuals for 4025H 2021

Brands by name

Popular brands

Bad Boy 4025H 2021, Operator'S Manual

Search results

Summary of Contents for 4025H 2021

Reviews:

Related manuals for 4025H 2021

Brands by name

Popular brands