Page 5 - 5
MAINTENANCE
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
5
LIGHT BULB REPLACEMENT
To reduce the possibility of premature bulb failure, do not touch new bulbs with bare fingers. Use clean, dry tissue or
paper towel to handle the glass portion of the bulb.
Headlight Bulb Replacement
Make sure that the vehicle key switch is in the OFF position
and the key has been removed.
Locate the headlight bulb socket on the backside of the light
assembly. Turn bulb socket a quarter turn counterclockwise
to unlock. Pull out bulb and socket, remove old bulb from the
socket. Insert new bulb in socket and position bulb socket
into headlight housing and rotate socket a quarter turn clock-
wise to secure.
Taillight Bulb Replacement
Make sure that the vehicle key switch is in the OFF position
and the key has been removed.
The taillight contains an LED light board rather than a light
bulb, if the LEDs burn out the whole light will have to be
replaced.
WHEELS AND TIRES
A tire explosion can cause severe injury or death. Never exceed the inflation pressure rating on
the tire sidewall.
To reduce the possibility of tire explosion, pressurize tire with small amounts of air applied inter-
mittently to seat beads. Due to the low volume of the small tires, overinflation can occur in sec-
onds. Never exceed the tire manufacturer’s recommendation when seating a bead. Protect face
and eyes from escaping air when removing a valve core.
Use caution when inflating tires. Overinflation could cause the tire to separate from the wheel or
cause the tire to explode, either of which could cause severe injury.
To reduce the possibility of severe injury caused by a broken socket when removing wheels, use
only sockets designed for impact wrench use.
Tire Repair
Tool List
Qty.
Tool List
Qty.
Lug Wrench, 3/4” or 17mm....................................... 1
Impact Socket, 3/4” or 17mm.....................................1
Impact Wrench ......................................................... 1
Torque Wrench, ft. lbs. ...............................................1
Steel wheel rims will require the 3/4” lug wrench and aluminum wheel rims will require the 17mm lug wrench.
Generally, the most cost effective way to repair a flat tire resulting from a puncture in the tread portion is to use a com-
mercial tire plug.
Inside
of Cowl
Headlight
Bulb
Summary of Contents for 2013 INSTINCT
Page 1: ...INSTINCT OWNER S MANUAL 630839 ISSUED SEPTEMBER 2012...
Page 55: ......