TF2089904-KK-00 Eng Page 9 of 22 20150422 V.1
Lighting Instruction
Step
Procedure
Illustration
1.
Read all instructions before lighting.
2.
Turn regulator control valve to OFF position.
3.
Fully turn timer control knob clockwise.
4.
Fully open LP tank valve.
5.
Light match and place it over burner.
Tip: Wooden kitchen match works best.
6.
PRESS and continually HOLD down push button of
safety valve while slowly turning ON the regulator
control valve. Continually hold down the push button
of the safety valve. DO NOT stand with head or arms
over cooker.
7.
After burner is lit, continue to HOLD the push button
for 10 seconds and then release. Holding push
button of safety valve for less than 10 seconds will
cause burner flame to go out.
8.
If ignition does not occur in 5 seconds, turn the regulator and LP tank valve off, wait 5 minutes, and
repeat the lighting procedure.
9.
Check the position of thermocouple, make sure the
flame has full contact with the thermocouple
Note: If thermocouple does not have full contact with
flame, unit will not stay lit.
10.
Cycle time for timer is around 15 minutes. If the timer is not reset within around 15 minutes, the burner
will shut OFF automatically. If this occurs, please follow lighting instructions and continue to cook.
HOLD the Push
button of safety
valve
