18
Figure 8
Figure 9
Operating Instructions (Continued)
W
CAUTION: Do NOT lean on the side burner shelf.
W
CAUTION: Attempting to light the burner with the lid closed may cause an explosion.
Lighting
1 . Open lid .
2 . Check for obstructions of airflow to the burners . Spiders, insects and webs can clog the burner/venturi tube . A clogged burner tube can
lead to a fire .
3 . Control knob must be in the “ OFF” position
(Figure 3) .
4. LP:
Connect LP gas tank per “Installing LP Gas Tank” section .
NG:
Connect NG main line per “Installing Natural Gas Line” section .
5. LP:
Turn LP gas tank valve to “OPEN .”
NG:
Turn natural gas main valve to “ON .”
6 . Push and turn control knob to (HIGH) . The burner should light . If not, repeat up to three times .
7 . If ignition does not occur in 5 seconds, turn burner control knob “ OFF,” wait 5 minutes and repeat lighting procedure .
8 . If igniter does not light burner, use a lit match secured with the Lighting Rod (included with grill) to light burners . Position the lit match near
side of the burner (Figure 7) .
Important:
Always use the Lighting Rod (included) when lighting burner with a match .
9 . After lighting, observe the burner flame . Make sure all burner ports are lit and flame height matches illustration (Figure 6) .
W
CAUTION: If burner flame goes out during operation, immediately turn the control knob to the “ OFF”
position
(a) LP gas tank valve “CLOSED” or
(b) NG main valve “OFF”
and open lid to let the gas clear for 5 minutes before re-lighting.
Turning Off
1. LP:
Turn LP gas tank valve to “CLOSED .”
NG:
Turn natural gas main valve to “OFF .”
2 . Turn control knob clockwise to the “ OFF” position .
Note: A “poof” sound is normal as the last of the LP gas is burned .
3. LP:
Disconnect LP gas tank per “Disconnecting LP Gas Tank” section .
NG:
Keep NG main gas line connected .
Figure 7
Lighting
Rod
Match
Operating Grill Lights
Turning On
1 . Make sure the grill light button is in the (OFF) position (Figure 8) .
2 . Connect and secure battery box, per assembly instructions .
3 . Push grill light button to (ON) position
(Figure 9) .
Turning Off
1 . Push grill light button to (OFF) position
(Figure 8) .
2 . Disconnect battery box cord .
Note: battery cord should always be unplugged when not in use .
Replacing the batteries (See Assembly Step 24)
W
WARNING: Do not mix old and new batteries
W
WARNING: Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-
cad, ni-mh, etc.) batteries
1 . Remove battery box back cover .
2 . Replace AA batteries (4) .
3 . Replace battery box back cover .
