Backyard 1801011, Owner'S Manual

Page: 40 / 160

SLIDE ASSEMBLY
STEP 1
●
PLACE SLIDE BRACE CENTERED ON THE BOTTOM 1/4" FROM THE EDGE. TRANSFER HOLES
ON THE BOARD THROUGH THE SLIDE BED AS SHOWN BELOW. USE A 3/8" DRILL BIT.
●
ATTACH SLIDE BRACE TO SLIDE USING HARDWARE SHOWN.
TOP
BOTTOM
TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.
(SEE SLIDE ASSEMBLY
INSTALLATION STEP FOR
TOP MOUNTING HOLE
DRILLING LOCATIONS).
USE M77 SLIDE BRACE AS A TEMPLATE
FOR DRILLING BOTTOM HOLE PATTERN
IN SLIDE BED. BE SURE TO PLACE SLIDE
BRACE UP 1/4" FROM BOTTOM EDGE OF
SLIDE BED BEFORE MARKING HOLE
PATTERN.
BOLT WH
5/16x1/2
(3)
UW - SLIDE BED 8' LIGHT GREEN - A100356
(1)
M77 - SLIDE BRACE - W4L08748
5/8"x3 3/8"x17 1/4" (16x86x438)
(1)
T-NUT 5/16
(3)
SLIDE BED 8' LIGHT GREEN
BOLT WH 5/16x1/2
(3 PLCS)
T-NUT 5/16
(3 PLCS)
M77