![background image](http://html1.mh-extra.com/html/backyard-products/shedmaster-gable-8-x-12/shedmaster-gable-8-x-12_assembly-manual_3361994037.webp)
36
1/2"
(1,3 cm)
Fig. C
Gable
Trim
ROOF PANELS
x6
2" (5,1 cm)
PARTS REQUIRED:
Roof panels may cause serious injury until securely fastened.
Install all roof panels with the rough side facing up (painted grid lines side).
3/4" GAUGE
BLOCK
GAA
Move to the opposite end.
Using the long edge of the panel as
a lever, move the panel side-to-side
until the top corner is flush at the
peak
(Fig. B)
.
Move the gable trim until it is 1/2"
from the roof panel
(Fig. C)
.
Secure panel with (2) 2" nails
in the corners.
48 x 96"
(121,9 x 243,8 cm)
x1
2
3
1
BEGIN
Before installing first roof panel,
measure down 48" from rafter peak
and mark 2 rafters, as shown.
Place (1) 2" nail at each mark.
(Nails will support panel in position.)
Install (1)
48" x 96"
panel.
Use the gauge block to ensure
the 3/4" measurement on the
rafter
(Fig A)
, and that the panel
is flush at the peak
(Fig. B)
.
Secure the panel with (2) 2"
nails in the corners.
2 Nails
2 Nails
Flush
at peak
Fig. B
Flush
at peak
Fig. B
Fig. A
3/4"
(1,9 cm)
Gauge
Block
Move Gable
2"
(5,1 cm)
Nails
48"
(121,9 cm)