![background image](http://html1.mh-extra.com/html/backyard-products/shedmaster-gable-8-x-12/shedmaster-gable-8-x-12_assembly-manual_3361994030.webp)
29
RAFTERS
3" (7,6 cm)
PARTS REQUIRED:
x20
Align rafters with the wall studs. Ensure the measurement between rafters, as shown.
Secure rafters with (2) 3" screws angled into top plate
(Fig. B)
.
NOTE: use (2) screws at siding seams.
Secure with with (1) 2" screw through panel into end of rafter
(Fig. A)
.
1
FINISH
Your rafters are now installed.
BEGIN
2
3
2" (5,1 cm)
x14
2"
(5,1 cm)
Screw
Fig. A
Maintain the measurements between rafters.
3"
(7,6 cm)
Screws
into top plate.
Fig. B
x5
Preassembled
Align over studs.
22-3/4"
(57,8 cm)
22-3/4"
(57,8 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
DIMENSIONS ARE FROM OUTSIDE OF WALL PANELS
DIMENSIONS ARE TO CENTER OF RAFTERS