57
DOOR TRACK
Install right door track first.
Place right track brackets flush along top of lower window trim and flush to right corner trim.
Mark bracket-hole locations on window trim. Pre-drill holes using a 1/8" drill bit.
Secure track with (4) 2" lag screws through bracket and window trim into header
(Fig. A)
.
Slide left rail inside right track bracket flush to right track rail
(Fig. B)
.
Mark bracket-hole locations on window trim. Pre-drill holes using a 1/8" drill bit.
Secure track with (4) 2" lag screws
2
Fig. B
Left Rail
1/8" BIT
(3 mm)
2" (5,1 cm)
Lag Screws
Flush
BEGIN
¸
1
x8
5/16" x 2"
(8m x 5,1 cm)
x2
PARTS REQUIRED:
Flush
Flush
Flush
Flush
Flush Inside
Flush track rails
inside of
center bracket
Fig. A
Flush
Caulk along entire
length of track
to validate your
warranty.