![background image](http://html1.mh-extra.com/html/backyard-products/heartland-16985/heartland-16985_assembly-manual_3353985041.webp)
39
RAFTER JIG
x2
3" (7,6 cm)
x3
x1
3/8 x 5-3/8 x 5-1/2" (1 x 13,6 x 14 cm)
2 x 3 x 13" (5 x 7,6 x 33 cm)
RK
101-3/8"
(257,5 cm)
Important
measurement
DOOR
FINISH
Make a rafter jig to make sure all rafters are assembled the same.
Measure from corner of back wall and
RK
(already installed) as shown.
Secure
RK
on the fl at square to back wall at measurement using
(2) 3" screws.
Install a second
RK
on edge and 3/8" thick angle trim piece as shown
(Fig. A)
.
You have fi nished building your rafter jig.
Required because rafter
is uneven at bottom
2
PARTS REQUIRED:
RK
End Cap
3/8 x 5-3/8 x 5-1/2"
(1 x 13,6 x 14 cm)
3" (7,6 cm) screw
must drive in all the way
2-1/2"
(6,4 cm)
RK
Fig. A
RK
1
BEGIN