29
2" (5 cm) x34
PARTS REQUIRED:
3/8 x 48 x 72"
(1 x 122 x 183 cm)
48"
(122 cm)
3/4"
(1,9 cm)
3/4"
(1,9 cm)
x2
3/4"
GAUGE BLOCK
GAA
SIDE WALL PANELS
BEGIN HERE
6" (15 cm)
12" (30 cm)
DOO
R
For squareness maintain 3/4" and
Á ush under sofÀ t panel.
3/4" Gauge Block
Fig. A
Fig. B
3/4"
(1,9 cm)
3/4"
(1,9 cm)
2 Nails
2 Nails
LIP
EDGE
SQUARE
EDGE
Flush
Flush
Place the
48 x 72"
panel onto wall frame with primed side up as shown. Note the lip and
square edges.
Use the gauge block to mark the 3/4" measurement on the wall stud. Locate the panel
ush under the sof t panel. Secure panel with two 2" nails in the corners
(Fig. A)
.
7
6
5
Nail the panel using 2" nails 6" apart on edges
and 12" apart inside panel.
Ensure your wall frame is square by installing one panel and squaring frame.
Move to the opposite end. Using the long edge of the panel as a lever move the panel side-to-
side until you have a 3/4" measurement on the wall stud. Secure corner with two 2" nails.
Do not nail
in groove.
There will be an
overhang at top.
Primed Side
UP
