shopbackyardpro.com
22
|
Operation
PREHEATING THE GRILL
COOKING INSTRUCTIONS
CURING INSTRUCTIONS
COOK MODE
1.
Follow SETUP PROCEDURE to ensure the grill is safe for operation.
2.
Follow LIGHTING INSTRUCTIONS to start the grill, then set the control knob to HIGH.
3.
Close the lid and allow the grill to maintain at least 400°F for about 10 minutes.
4.
Open lid, set the controller to the desired temperature, close lid once the temperature is close to the desired setting.
5.
Cook food as desired. (See COOKING INSTRUCTIONS for more operating information.)
1.
Follow SETUP PROCEDURE to ensure the grill is safe for operation.
2.
Follow LIGHTING INSTRUCTIONS to start the grill.
3.
Close the lid and allow the grill to maintain at least 400°F for about 10 minutes.
4.
Set the desired cook temperature by first pressing TEMP so that SETPOINT is illuminated.
Be certain SENSOR is set to GRILL.
5.
Using the SET ADJ up or down arrow buttons, set the desired grilling temperature.
The temperature adjusts in 5° increments and will be displayed on LED Display.
NOTE: 600°F temperature setting is recommended to only be used for cleaning.
However, in colder weather, it might be used for cooking to overcome the ambient temperature.
6.
Once the desired temperature is set, press TEMP to ACTUAL to display the current grill temperature.
NOTE: There might be some discrepancy between the digital temperature displayed and the temperature
observed on the analog lid gauge. Some variance is normal due to location and calibration differences.
Prior to each use, preheat the grill to remove bacteria or foreign material left from previous use. This also increases the cooking
performance since all of the grate and components have balanced temperature. Without preheating, it takes much longer for food
to get to cooking temperature.
The pellet grill has 2 modes to control the pellet feeding speed. These are designated as the COOK MODE and SMOKE MODE.
The COOK MODE is for grilling or slow cooking methods, while the SMOKE MODE is for smoking and adding flavor to foods being prepared.
COOK MODE is the grill's default cooking method.
In COOK MODE, the grill will automatically maintain a set temperature by adding pellet fuel to the fire pot when needed by monitoring the
internal grill temperature. During cooking, it is important to keep the grill lid closed for the grill to function properly.
NOTE: The maximum temperature the pellet grill can achieve is influenced by the ambient temperature. In colder weather, the grill may not be
able to achieve the highest set temperature and it will continually feed pellets into the fire pot attempting to reach the set temperature.
BEFORE INITIAL USE
1.
Follow SETUP PROCEDURE to ensure the grill is safe for operation.
2.
Follow LIGHTING INSTRUCTIONS to start the grill, then enter COOK mode.
3.
Set the temperature to 250°F and allow to operate for 2 hours.
4.
Increase the temperature to 400°F and allow to operate for an additional hour.
5.
Turn grill OFF and allow to fully cool.
6.
Your grill is now cured and ready for use.
Before initial use, it is recommended to cure the grill to remove manufacturing oils or residue and minimise smoke odors or unnatural
flavors from being added to food.
