41
CLIMBING ROPE
INSTALL
Fig. 1
Feed top of Climbing Rope through front
of Upper Rope Arm (
1088-MS
) and tie a
double knot on the back side (
Fig. 1
)
.
For Safety, insure that the rope is
tight enough so that it can not be
looped back on itself.
Feed lower end of Climbing Rope through
hole in Lower Rail (
1088-MS
) and tie a
double knot on the back side
(
Fig. 1
)
.
Keep tying double knots at the
bottom end of rope until there is
no remaining loose rope.
Do not cut ends of rope.
OPTIONAL:
Tie several single knots in
locations to allow logical
hand-grab points.
Step 1
Step 2
2 x 6 x84"
1088-MS
2 x 6 x 84"
1088-MS