2
ASSEMBLY SAFETY and HELPFUL HINTS
Wear safety glasses during drilling, assembly of your playset accessory.
Children should not be allowed in the playset or accessory assembly and build area.
Note the hole orientation on parts to avoid mis-assembly.
Some steps require the assistance of two people to ensure proper assembly,
safety during assembly, as well as preventing any damage to the playset accessory.
All hex bolts and lag screws require a lock washer or lock nut.
To properly install lock nuts, three threads minimum must protrude
past the lock nut and be exposed once tightened.
Acorn nuts provide protection in case screw threads protrude past a surface.
Extra acorn nuts are provided for this reason. Please be certain to use these
acorn nuts in the event this condition arises.
Due to wood characteristics and the manufacturing process hex bolts
may protrude past a surface. If this condition occurs add additional
supplied washers to eliminate bolt protrusion.
Make sure all fasteners are installed and tightened as specified.
Using a fastener not specified in a particular application may result in too much
thread exposure or not enough thread engagement.
STOP!!!
Check all parts and hardware before beginning. If any parts are
missing or damaged please circle and call the phone number listed.
DO NOT CONTACT THE STORE OR RETURN YOUR PLAYSET ACCESSORY!
KEEP THIS INSTALLATION MANUAL FOR FUTURE CARE
AND MAINTENANCE REFERENCE.
To aid in making your playset assembly easier,
here is a listing of some helpful hints.
*IMPORTANT HARDWARE INFORMATION*
Summary of Contents for 4030
Page 2: ...This page intentionally left blank...
Page 19: ...17...
