Hardware
Illustration:
Swing Hanger
Glider
Support
5/16” Lock Nut
Fender Washer
Glider
Caps
Swing Bushing
Swing Hanger
Note: Circular bend on swing
hanger must run parallel
with board.
Step 25
Attach
H100097 Swing Hangers
to Glider Supports using
A100066 Swing Hanger Bushings
, Fender Washers
and 5/16” Lock Nuts. Install
A100067
Caps into Glider Supports.
Attach Chains to
Belt Swings
with
Quick Links
and attach Swings to Swing Hangers with
Carabiners
and
Plastic
Safety Tubes.
Assemble
Glider Ends
to
Glider Seat
with 5/16” x 5-¾” Bolts, Flat Washers and 5/16” Lock Nuts. Attach Chains to
Glider Ends
with Quick Links and Hang Glider on Glider supports and tighten Quick Links on Glider and Swings.
ITEMS NEEDED
4-A100066 Swing Hanger Bushings
4-H100097 Swing Hangers
2-A100027 Swing Belts
2-A100021 Glider Arms
1-A100025 Glider seat
4-A100047 57” Inch Chain
4-A100096 47” Inch Chain
2- Bags of 4 A100069 Quick Links
4-A100067 Glider Support Caps
HARDWARE NEEDED
2-5/16” x 5 ¾” Bolts
6-5/16” Lock Nuts
6-Fender Washers
4-Flat Washers
Tighten Quick
Link
Insert Chain Into
Quick Link
• Slip the Plastic Safety
Tubes
on the Carabiner.
Flat Washer
Lock Nut
5 3/4 WHA Bolt
Flat Washer
PAGE 47