Important Assembly Notes
1) While assembling unit, take time before and after each phase to make sure pergola is square and level.
If pergola is not square and level, assembly will be difficult and improper assembly may result. Extra care
must be taken to insure the pergola is square and level.
2) Tighten bolts securely.
3) Pay close attention to the ITEMS NEEDED FOR EACH PHASE. They can be a valuable aid when
sorting your wood and hardware. Assembly will be made easier if items are sorted by step.
4) Pay close attention to make sure you are using the correct hardware in the correct steps. Using
incorrect hardware may result in improper assembly.
5) Read each step thoroughly. The written steps may include important information not
shown in the illustrations.
Basic Setup Dimensions
Place the pergola on level ground, not less than 6 ft [2 m] from any structure or obstruction such
as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
7'-10 15/16"
7'- 7/8"
11'-11"
11'-11"
6'-0"
6'-0"
