A HELPER IS REQUIRED FOR THIS STEP.
6 FT SLIDE RAIL RIGHT
(1)
A6P00390
SCREW PFH
8x2 1/2"
(16)
H100090
TIP:
STEP 2
NOTE:
USING A 1/8" DRILL BIT, DRILL PILOT HOLES IN EACH INDENTATION ALONG EACH SIDE RAIL. THERE SHOULD BE 8
INDENTIONS ON EACH RAIL.
PLACE THE SLIDE RAIL ON FLAT SURFACE. STARTING AT THE BOTTOM, INSERT THE SLIDE BED INTO THE CHANNEL ON THE INSIDE OF
THE RAIL. HOLD THE SLIDE BED IN PLACE WHILE A HELPER BENDS THE SLIDE BED INO THE CHANNEL. MAKE SURE THE SLIDE BED IS
COMPLETELY INSERTED INTO THE CHANNEL.
INSERT THE CENTER SLIDE BRACE INTO THE RESPECTIVE LOCATION. SECURE THE SLIDE BED AND CENTER USING THE
PROVIDED
HARDWARE.
PLACE SECOND SLIDE RAIL ASSEMBLY OVER THE TOP OF THE SLIDE BED AND M78 CENTER SLIDE BRACES. INSERT THE
SLIDE BED AND CENTER SLIDE BRACES INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS COMPLETELY IN THE SLIDE
CAVITY.
SLIDE ASSEMBLY
389
(x1)
6 FT SLIDE RAIL LEFT
390
(x1)
6 FT SLIDE
RAIL RIGHT
090
(x16)
SCREW - 2 1/2"
M78
(x1)
SLIDE BRACE
6 FT SLIDE RAIL LEFT
(1)
A6P00389
SLIDE BRACE - W4L13298
5/8"x3 3/8"x14 1/4" (16x86x362)
M78
(1)
FAILURE TO INSERT SLIDE BED COMPLETELY AND SECURED
MAY RESULT IN
INJURY OR AMPUTATION. EXPOSED SLIDE
EDGES CAN BE SHARP AND BECOME
A LACERATION HAZARD IF
THE SLIDE IS NOT PROPERLY ASSEMBLED.
23
