background image

Please read entire booklet completely before beginning the assembly process

Please retain these instructions and your receipt for future reference.  Keep them in a safe place where you can refer to them as needed. 

In order to provide you with the most effi

    cient service, it is required that you provide us with the part numbers when ordering parts.

Tracking Number Reference Label 

Tracking ID number on the carton and on the bottom of the vertical ID plate are included for tracking purposes associated with warranty claims.

Th  is Limited Warranty by B ackyard Discovery applies to products manufactured under the B ackyard Discovery brand or its other brands including but not limited to B ackyard 

Botanical, Adventure Playsets, and Leisure Time Products.

All wood, Rocket Slides™, powder-coated steel components, and hardware are warranted for ten (10) years from the original date of purchase against rot and decay or defects in 
workmanship and materials that affect the structural integrity of the parts, accessories and components. In the event of any rot, decay or defect during the ten year warranty period, 

Backyard Discovery

 will remedy the defect as described herein, without charge to the purchaser for parts, as soon as practical. The remedy will consist of repair or replacement of 

the product, or refund of the purchase price, at the discretion of 

Backyard Discovery

 after opportunity to inspect the alleged defect or photographs thereof. However, 

Backyard 

Discovery

 will not elect to refund the purchase price unless it is unable to provide a replacement, and repair is not commercially practicable or cannot be made within a reasonable 

time. All freight and labor charges will be the responsibility of the purchaser.

Backyard Discovery

, Inc. warrants that this product will be free from defect in materials and workmanship for a period of two (2) years from the original date of purchase. This two 

(2) year warranty covers all parts not mentioned in the above ten (10) year warranty. In the event of any such defect during the two year warranty period, 

Backyard Discovery

 will 

remedy the defect as described herein, without charge to the purchaser for parts, as soon as practical. The remedy will consist of repair or replacement of the product, or refund of 
the purchase price, at the discretion of 

Backyard Discovery

 after opportunity to inspect the alleged defect or photographs thereof. However, 

Backyard Discovery

 will not elect to 

refund the purchase price unless it is unable to provide a replacement, and repair is not commercially practicable or cannot be made within a reasonable time. All freight and labor 
charges will be the responsibility of the purchaser.

In addition, within the first 30 days from date of purchase, 

Backyard Discovery

 will replace any parts found to be missing from or damaged in the original packaging.

Th is warranty applies to the original owner and registrant and is non-transferable. Regular maintenance is required to assure maximum life and performance of this product. 

Failure by the owner to maintain the product according to the maintenance requirements may void this warranty. Maintenance guidelines are provided in the Owner’s Manual. 

Th is Limited Warranty does not cover: 

•  Labor for any inspection

•  Labor for replacement of any defective item(s)

•  Incidental or consequential damages

•  Cosmetic defects which do not aff ect performance or integrity of a part or the entire product

•  Vandalism, improper use, failure due to loading or use beyond the capacities stated in the applicable Assembly Manual.

•  Acts of nature including but not limited to wind, storms, hail, fl oods, excessive water exposure

•  Improper installation including but not limited to installation on uneven, unlevel, or soft  ground

•  Minor twisting, warping, checking, or any other natural occurring properties of wood that do not aff ect performance or integrity

Backyard Discovery products have been designed for safety and quality. Any modifications made to the original product could damage the structural integrity of the unit leading 

to failure and possible injury. Modification voids any and all warranties and Backyard Discovery assumes no liability for any modified products or consequences resulting from 

failure of a modified product. 

Th is product is warranted for RESIDENTIAL USE ONLY. 

Any unintended use such as home child care, daycare center, faith center, government facility, home owner's associate, 

park or school will make the warranty of our product null & void.

Vertical ID 

     

Plate

Tracking number 

For Your Records: 

Please take time and fi ll out the information below.  Th

  is information will be needed for warranty issues.

Where Purchased: 

Date of Purchase: 

Installation Date:

Installed by:

Tracking Number:

Owner’s Manual

Limited Warranty

4

Summary of Contents for Atlas 2002128



















































Reviews: