FIG. 1
FIG. 2
FIG. 3
° MAKE IMPRESSIONS IN ONE END CAP WITH SCREWS
° REMOVE SCREW HALVES FROM BUTTONS
° SCREW HALVES INTO IMPRESSIONS
PUSH ON
SNAP HALF
1/2 WZ
(18)
SCREW ON
SNAP HALF
WZ
(18)
° SNAP BUTTON HALVES TO SCREW HALVES
° REPEAT FOR OTHER END OF TARP THEN SIDES
° DRAPE TARP EVENLY OVER RIDGE CAP
° INSERT SCREW HALVES INTO BUTTON HALVES
ATTACHED TO TARP
TARP ASSEMBLY - TARP & SNAP ATTACHMENT
(1RTTHJR-1
7
SHOWN)
STEP 3
- TARP (64) 1/32"x66 1/2"x115 5/8" - 4F1068-16 -
1/32"x66 1/2"x115 5/8" (.6x1690x2936)
(1)
- TARP (45) 1/32"x66 1/2"x88 1/4" - 4F1071-16 -
1/32"x66 1/2"x88 1/4" (.6x1690x2243)
(1)
OR
SCREW ON SNAP HALF WZ
(18 PLCS)
PUSH ON SNAP HALF 1/2 WZ
SNAP
SNAPS
(2 PLCS EACH TRUSS)
