Anchoring Instructions
STEP 68
TWIST STAKES INTO GROUND
AGAINST GROUND BOARDS AND
CORNER POSTS WHERE SHOWN.
ATTACH TO CORNER POSTS USING 1"
LAG SCREWS & FLAT WASHERS IN
ALL PLACES WHERE "STAKE A" IS
NOTED.
ATTACH TO MONKEY BAR AND SWING
BEAM USING 1" BOLTS, FLAT
WASHERS, 9X18 LOCK WASHERS AND
5/8" BARREL NUTS IN PLACES WHERE
"STAKE B" IS NOTED.
FINAL STEP
DOUBLE CHECK EVERY BOLT, SCREW AND NUT FOR TIGHTNESS.
MAKE SURE EVERY BOARD IS SECURE AND MAKE SURE THE PLAY
SET IS LEVEL.
ENJOY YOUR NEW PLAY SET!
NOTE:
FAILURE TO USE GROUND STAKES CAN
VOID WARRANTY & CAUSE INJURY!
STAKE A
STAKE B
STAKE 'B'
STAKE 'B'
STAKE 'B'
STAKE 'B'
STAKE 'B'
STAKE 'B'
STAKE 'A'
STAKE 'A'
SQ
SCREW PWH 8x5/8
(2 PLCS)
STEP 69
ATTACH 'SQ' REVISION TAG TO ONE
OF THE FLOOR JOISTS UNDER THE
FORT DECK.
SQ - "A" REVISION TAG - A100314
(1)
KC - METAL GROUND STAKE BROWN - A100178
(8)
USING A 5/16" OR 8MM
DRILL BIT, DRILL THROUGH
GROUND BOARD WHERE
YOU WANT TO ATTACH
GROUND STAKE.
B4
NUT BARREL WH 1/4x5/8"
(6 PLCS)
WASHER LOCK EXT 8x15
(6 PLCS)
WASHER FLAT 9x18
(6 PLCS)
BOLT WH 1/4x1"
(6 PLCS)
WASHER FLAT 9x18
(2 PLCS)
LAG SCREW WH 1/4x1
(2 PLCS)
KC
KC
NUT BARREL
WH 1/4x5/8"
(6)
BOLT WH
1/4x1"
(6)
WASHER
LOCK EXT
8x15
(6)
WASHER
FLAT 9x18
(8)
LAG SCREW
WH 1/4x1
(2)
SCREW PWH
8x5/8
(2)
