STEP 12
USING A HAMMER, INSERT 5/16" T-NUTS INTO G2 & G3 BOARDS, AS
SHOWN.
ATTACH G2 AND G3 BOARDS TO E2 BOARDS USING 2-1/4" BOLTS,
LOCK WASHERS AND 5/16" T-NUTS, AS SHOWN
.
USING K1 BOARD AS A TEMPLATE, PILOT DRILL USING 1/8" DRILL BIT
AND ATTACH K1 BOARDS TO THE ENDS OF G2 AND G3 BOARDS
USING 2" SCREWS, AS SHOWN
.
WASHER
LOCK EXT
8x19
(4)
E2
K1
G3
G2
K1
T-NUT 5/16
(8)
BOLT WH
5/16x2-1/4
(4)
SCREW PFH
8x2
(12)
K1 - SHORT TARP BOARD - W102487
5/8"x5 1/4"x26 7/8" (16x134x682)
(2)
G3 - LONG TARP BOARD - W102486
1"x5 1/4"x46 1/2" (24x134x1180)
(1)
G2 - SWING BEAM MOUNT - W102478
1"x5 1/4"x46 1/2" (24x134x1180)
(1)
G2
