QTY
DESCRIPTION
1
SLIDE BRACE
3
BOLT WH 5/16x1/2
3
NUT BARREL WH 5/16x5/8
3
WASHER LOCK EXT 12x19
1
SLIDE BED 8' YELLOW
3 5/8
8 5/8
13 5/8
1
NUT BARREL WH 5/16x5/8
WASHER LOCK EXT 12x19
SLIDE BRACE
BOLT WH 5/16x1/2
SLIDE BED 8' YELLOW
8 FOOT SLIDE ASSEMBLY
PHASE 1
Phase Notes
●
DRILL 3 HOLES AT ONE END OF THE PLASTIC SLIDE BED USING A 5/16" DRILL BIT AND USING THE
DIMENSIONS SHOWN BELOW. THIS END WILL BE THE TOP OF THE SLIDE.
●
TAKE NOTE OF SLIDE BED SURFACE FINISH, THE DULL SIDE WILL BE TOWARDS THE GROUND. PLACE
SLIDE BRACE CENTERED ON THE BOTTOM (DULL SIDE) AND 1/4" FROM THE EDGE. TRANSFER HOLES
ON THE BOARD THROUGH THE SLIDE BED AS SHOWN BELOW. USE A 5/16" DRILL BIT.
●
ATTACH SLIDE BRACE TO SLIDE USING HARDWARE SHOWN.
BRIGHT SIDE
TOP
TOP
BOTTOM
TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.
REV 8/02/11 BRS
