background image

Please read entire booklet completely before beginning the assembly process

Please retain these instructions and your receipt for future reference.  Keep them in a safe place where you can refer to them as needed. 

In order to provide you with the most effi

    cient service, it is required that you provide us with the part numbers when ordering parts.

Tracking Number Reference Label 

Tracking ID number on the carton and on the bottom of the vertical ID plate are included for tracking purposes associated with warranty claims.

Th

  is Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard 

Botanical, Adventure Playsets, and Leisure Time Products.

Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. Th

  is one (1) year 

warranty covers all parts including wood, hardware, and accessories. All wood carries a fi ve (5) year pro-rated warranty against rot and decay. Refer to the schedule below for charges 

associated with replacement of parts under this Limited Warranty. In addition, Backyard Discovery will replace any parts within the fi rst 30 days from date of purchase found to be 

missing from or damaged in the original packaging. 

Th

  is warranty applies to the original owner and registrant and is non-transferable. Regular maintenance is required to assure maximum life and performance of this product. Failure 

by the owner to maintain the product according to the maintenance requirements may void this warranty. Maintenance guidelines are provided in the Owner’s Manual. 

Th

  is Limited Warranty does not cover: 

•  Labor for any inspection

•  Labor for replacement of any defective item(s)

•  Incidental or consequential damages

•  Cosmetic defects which do not aff ect performance or integrity of a part or the entire product

•  Vandalism, improper use, failure due to loading or use beyond the capacities stated in the applicable Assembly Manual.

•  Acts of nature including but not limited to wind, storms, hail, fl oods, excessive water exposure

•  Improper installation including but not limited to installation on uneven, unlevel, or soft  ground

•  Minor twisting, warping, checking, or any other natural occurring properties of wood that do not aff ect performance or integrity

Backyard Discovery products have been designed for safety and quality. Any modifi cations made to the original product could damage the structural integrity of the unit leading to 

failure and possible injury. Modifi cation voids any and all warranties and Backyard Discovery assumes no liability for any modifi ed products or consequences resulting from failure 

of a modifi ed product. 

Th

  is product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a Backyard Discovery product be used in public settings.  Such use may lead to product 

failure and potential injury. Any and all public use will void this warranty. Backyard Discovery disclaims all other representations and warranties of any kind, express or implied.  

Vertical ID 

     

Plate

Tracking number 

For Your Records: 

Please take time and fi ll out the information below.  Th

  is information will be needed for warranty issues.

Where Purchased: 

Date of Purchase: 

Installation Date:

Installed by:

Tracking Number:

Product Age 

Customer Pays

All Parts

0-30 days from date of purchase

$0 and free shipping 

31 days to 1 year

$0 + S&H

Wood Rot and Decay Only 

1 year 

$0 and free shipping 

2 year 

20% + S&H

3 year 

40% + S&H

4 year 

60% + S&H

5 year 

80% + S&H

Over 5 years

100% + S&H

 Pro Rated Part Replacement Schedule

Pro Rated Part Replacement Schedule

Owner’s Manual

Limited Warranty

4

Summary of Contents for 2051164B





















Reviews: