background image

Positioning Your Playcenter

Th e playcenter is designed to be installed on a level

surface by an adult with an adult helper.  Place

in a fl at area of your yard to minimize ground

preparation.

Choose a level location for the equipment.  Th is can

reduce the likelihood of the play set tipping over and

loose-fi ll surfacing material washing away during

heavy rains.

Place the equipment not less than 6

'-7" 

(

2.0 

m) from

any structure or obstruction such as a fence,

 

garage,

house, overhanging branches, laundry lines,

 

or

electrical wires.

Provide enough room so that the children can use the

equipment safely.  For example, for structures with

multiple play activities, a slide should not exit in front

of a swing.

It is a good idea to place your playcenter in an area that

is convenient for adults to watch children at play.

Create a site free of obstacles that could cause injuries
– such as low overhanging tree branches, overhead

wires, tree stumps and/or roots, large rocks, bricks

 

and

concrete. Additional suggestions in the Suggested

Playground Surfacing Section.

Do not build your playset on top of surfacing material.

Locate bare metal platforms and slides out of direct

sunlight to reduce the likelihood of serious burns. A slide

that faces north will receive the least direct sunlight.

Separate active and quiet activities from each other.

For example, locate sandboxes away from swings or

use a guardrail or barrier to separate the sandbox

from the movement of the swings.

Suggested Playground Surfacing 

Do not install home playground equipment over

concrete, asphalt, packed earth, grass, carpet, or any

other hard surface. A fall onto a hard surface can

result in serious injury to the equipment user.

Do not install loose fi ll surfacing over hard surfaces

such as concrete or asphalt.

Shredded bark mulch, wood chips, fi ne sand and fi ne

gravel, are added as shock absorbing materials aft er

assembly.  If used properly these materials can absorb

some of the impact of a child’s fall.

All surface material should extend a minimum of

6'-7" (2.0 m)

 feet in all directions around the play area.

Do not apply playground surfacing until aft er the unit

is completely constructed.  Playset should not be built

on top of surfacing.

Use containment, such as digging out around the

perimeter and/or lining the perimeter with landscape

edging.

Installations of rubber tiles or poured-in-place

surfaces (other than loose-fi ll materials) generally

require a professional and are not “do-it-yourself

 

projects.

Shall use Playground Surfacing Materials (other than

loose-fi ll material) which comply with the safety

standard ASTM F1292 Standard Specifi cation of

Impact Attenuation of Surfacing Materials within the

Use Zone of Playground Equipment.

Anchors shall be placed as instructed to reduce

tipping hazards.

The following chart explains the fall height in feet from which a life threatening head injury would not be expected 

Critical Heights in feet (m) of Tested Materials

Material 

Compressed Depth 

6" (152mm) 

9" (228mm) 

12" (304mm) 

to 9" (228mm) 

Wood Chips

7' (2.13m) 

10-12' (3.0-3.6m)

11' (3.35m) 

10' (3.05m) 

Double-Shredded Bark Mulch 

6' (1.83m) 

10-12' (3.0-3.6m)

11' (3.35m) 

7' (2.13m) 

Engineered Wood Fibers

6' (1.83m) 

7' (2.13m) 

>12' (3.66m)

6' (1.83m) 

Fine Sand

5' (1.52m) 

5' (1.52m) 

9' (2.74m) 

5' (1.52m) 

Coarse Sand

5' (1.52m) 

5' (1.52m) 

6' (1.83m) 

4' (1.22m) 

Fine Gravel

5' (1.52m) 

7' (2.13m) 

10' (3.05m) 

6' (1.83m) 

Medium Gravel

5' (1.52m) 

5' (1.52m) 

6' (1.83m) 

5' (1.52m) 

Shredded Tires*

10-12' (3.0-3.6m)

N/A 

N/A 

N/A 

Uncompressed Depth 

*This data is from tests conducted by independent testing laboratories on a 6-inch depth of uncompressed shredded tire samples produced by four manufacturers.  The tests reported 

critical heights, which varied from 10 feet to greater than 12 feet.  It is recommended that persons seeking to install shredded tires as a protective surface request test 

data from the supplier showing the critical height of the material when it was tested in accordance with ASTM F1292.

Please Read This Before Starting Assembly

Owner’s Manual

6

Summary of Contents for 1952050B





















Reviews: