background image

The store where you made your purchase  

does not stock parts for this item. 

If you have assembly questions or you are missing or 

have damaged parts, please call

you can also visit www.backyarddiscovery.com 

or e-mail [email protected]

Please have the following information ready when you make your call:

Model Number of the product located on the front of the assembly manual

The item description and number from the parts list from the manual that was included in your box

1-800-856-4445

Read entire assembly manual, paying special attention to the important tips and safety information.

To ensure there are no missing pieces do a complete inventory by fi rst separating and identifying all parts.

Make sure to check packing material for small parts that may have fallen out during shipment.

Structures are not intended for public use. The Company does not warranty any of its residential structures
subjected to commercial use.

This manual contains helpful information concerning assembly preparation, installation procedure and
required maintenance.

Always keep safety in mind as your structure is being built.

Keep these instructions for future reference.

MISSING A PART?

CALL US BEFORE GOING 

BACK TO THE STORE

Please Read This Before Starting Assembly

Owner’s Manual

1

Summary of Contents for 1804524












































Reviews: