STEP 20
STARTING IN THE CENTER, PILOT DRILL USING 1/8" DRILL BIT AND ATTACH N9 BAY
WINDOW BOARDS TO THE EDGE OF (2) L6 BAY WINDOW HEADERS USING (4) 1"
SCREWS IN CORNERS AND 1-1/8" SCREWS. YOU WILL NEED TO LOCAT THE CENTER
OF BOTH THE L6 HEADER AND THE N9 BOARDS FOR PROPER ALIGNMENT.
USING N5 AS A TEMPLATE, PILOT DRILL USING 1/8" DRILL BIT AND ATTACH (2) N5 BAY
WINDOW BOARDS TO BOTH L6 BAY WINDOW HEADERS USING 1-1/8" WOOD SCREWS.
MAKE SURE THAT THE TOP AND BOTTOM FACES OF L6 HEADERS ARE FLUSH WITH
THE ENDS OF N5 BOARDS, AS SHOWN.
CENTER AND ATTACH (3) GK WINDOW FRAMES TO N5 BAY WINDOW BOARDS USING
(12) 3/4" PWH SCREWS.
STEP 21
ATTACH BAY WINDOW ASSEMBLY TO THE EDGES OF M9 & L2 WALL RAILS USING (6)
1-1/4" WOOD SCREWS.
SCREW PFH
8x1 1/8
(20)
SCREW PWH
8x3/4
(12)
SCREW PFH
8x1 1/4
(6)
L6 - BAY WINDOW HEADER - W100571
5/8"x4 3/8"x30 1/2" (16x112x774)
N9 - BAY WINDOW BOARD - W100596
5/8"x2 3/8"x6 1/4" (16x60x158)
N5 - BAY WINDOW BOARD - W100592
5/8"x2 3/8"x13 1/8" (16x60x332)
GK - WINDOW 216x267 GREEN - A100146
SCREW PFH
8x1
(4)
