POSITION YOUR ROOF PANELS ON THE GROUND SO THEY MIRROR EACH OTHER AS SHOWN.
REMOVE PROTECTIVE BLUE FILM FROM PANELS.
RIDGE
NOTE:
USE THIS PAGE TO FAMILIARIZE YOURSELF WITH THE ROOF PANEL & ASSIST YOU IN THE COMING STEPS.
WARNING:
GLOVES SHOULD BE WORN WHEN HANDLING ROOF PANELS; EDGES ARE SHARP.
Phase 2
PREPARATION
NOTE HOLE LOCATIONS
GO TOWARDS THE PEAK
OF THE ROOF.
• Note the pre-drilled holes on the top end of each sheet shown below. These holes will always go towards the ridge of the roof and
will be used to install the ridge cap in a later step. Assemble each roof panel by starting on the right side and working toward the
left as shown.
2 1/2 in
[63 mm]
27
