4
o
f
14
Step 3:
Connect the Bottom Seat Bracket on Seat-and-Back (C) to the “Back” position of the Swivel Plate
on Swivel Base (D) with Bolts (H), Swivel Base Connector (E), and Nuts (J). See Figure 2.
Tighten
bolts
using
Open Wrench (P & Q).
Figure 2
Step 4:
Add Bolt Caps (K & L) to Bolts (F, G & H). Place the Seat Cushion (M) and the Back Cushion (N)
on the chair frame and tighten straps. See Figure 3. Your swivel rocker is ready for use. Enjoy!
Note
: Cushions for Swivel Rocker are different sizes than cushions for Loveseat.
Figure 3
Note: Please see our video for additional assembly assistance:
https://insideout.store/video-assembly-instructions/
