S
T
E
P
S
T
E
P
S
T
E
P
10
Step 10: Locate Part H and place inside seat frame as shown in Box 21. Next, locate black rope (Part K) and attach Part H to
seat frame by first threading rope through the middle grommet of Part H and pulling half of the rope through the grommet.
Lace Part H with rope over frame and through each grommet working from base on each side until the two rope ends meet at
top brace (Part I) as shown in Box 22. Tie the two ends securely around Part I as shown in Box 23
. (
Adjustments may need to
be made when lacing so Part H is centered in seat frame)
Start Here
Box 21
Box 22
Box 23
Step 11: Locate the Threaded Connecting Link (Part V). Place it through the eye hole of
the eyebolt at the top of the assembled stand as shown in Box 24. Next, lift the
assembled chair frame and hook the Closed S-hook on the top of the chair assembly
through the threaded connecting link as in Box 24. Turn the threaded bolt on the
connecting link so that the link is secured.
Box 24
11
Step 12: Locate Part P (chair cushion) and place over the black seat mesh (Part
H). Secure Part P to chair frame by tying the tie straps located around Part P to
the chair frame as shown in photo Box 25.
12
Box 25
