background image

• KEEP THE FIRE COLUMN OUT OF THE WEATHER

    AND ELEMENTS.

• STORE THE FIRE COLUMN IN A DRY LOCATION

    OUT OF THE WEATHER.

• DO NOT LET THE BASE WITH ASH CATCHER FILL

    WITH WATER.

• DO NOT DUMP ASHES WHERE A FIRE CAN BE

    STARTED.

• DISPOSE OF ASHES IN PROPER RECEPTACLE ONLY

    AFTER ASHES HAVE COOLED.

• USE ANY COVER ONLY AFTER THE FIRE COLUMN

    IS COMPLETELY COOL TO THE TOUCH.

• STORE THE FIRE COLUMN IN AN AREA SO THAT IT

    WON'T BE PRONE TO TIPPING OVER AND BEING

    A HAZARD.

HELPFUL HINTS:

Congratulations on your purchase of the Fire 

Column!   At Landmann USA, we strive to provide 

you with an easy to use, easy to assemble product.  

However, in the unlikely event your package 

should have a missing or defective part, please 

contact us at:   

[email protected]

Proof of purchase may be required.   Thank you!

©2019

Distributed by Menard, Inc.

Eau Claire, WI   54703

Made in China

MODEL:   259-5165

MANUFACTURER MODEL:   21109

AVAILABLE ACCESSORIES

FOR THE FIRE COLUMN

These custom made accessories are

made just for the Fire Column.

COVER

MODEL 29501

For questions or comments please

Email customer service at:

[email protected]

ALL SURFACES

BECOME HOT

DURING USE!

!

!

PAGE 14

!

!

MULTI-PURPOSE

37 IN. POKER

MODEL 29240

For best results, the Fire Column should be 

cleaned after every use.   Make sure Fire Column 

is cool and all embers are extinguished before 

cleaning.

Clean off the ash catcher with shovel or by tilting 

the Fire Column to one side and removing the 

ash.

If any remaining firewood needs to be removed, 

turn the Fire Column on its side to remove.

Dispose of ashes in proper receptacle only after 

ashes have cooled.   Do not dump ashes where a 

fire can be started.

If the Fire Column needs to be cleaned, use a 

mild soap and water with a soft rag.   Dry 

thoroughly to prevent rust.

Occasionally, the Fire Column finish will need to 

be refinished.   Use a high quality, high heat 

paint to renew the finish.

  CLEANING

FIRE COLUMN

NEVER USE GASOLINE,
ALCOHOL OR  VOLATILE 
FLUIDS TO  START OR 
RESTART FIRES.

WARNING!

!

HOT!

!

WARNING!

!

HOT  SURFACES DURING USE! 

Summary of Contents for 259-5165















Reviews: