Backyard Creations 212-1911, Manual

Page: 31 / 35

STEP#24
(!) Place Roof Plates (2pc RF11, 1 pc RF12 and 1 pc RF13) onto long side of assembled
Roof Ribs with front edges tucked and clipped into Roof Top Supports. Then place 1 pc
Mould Layer (HD10) on and attach those Roof Plates onto the Roof Border with 4pcs bolts
(AA).
@ On the left, Place Roof Plates (1 pc RFS, 1 pc RF7 and 1 pc RF9) onto assembled Roof Ribs, and
attach RFS, RF7 and RF9 on roof ribs with 3pcs bolts (AA). Next place 1 pc Mould Layer (HD8) and 1 pc
Mould Layer (HD9) on and attach those Roof Plates onto the Roof Border with 6pcs bolts
(AA).
Then
assemble Roof Plates (1 pc RF6, 1 pc RF8 and 1 pc RF10) on the right in the same way.
Repeat these 2 steps to complete the other long side of the roof.
Note: Some Plates (RF9, RF10, RF11, RF12 and RF13) should be tucked and clipped into Roof Top Supports.
*Do not stand below roof, falling roof plates may cause injury.
CD
HD8x4
AAx44 � �
HO
HD7
HOO
HD8 HD9 HD10 HOO HD8