Ribcage Installation: Part 2 - Assembly
www.back-bone.ca | [email protected]
36
Carefully place it over the filter to keep it in position.
Take the filter backing paper, find the shiny side and place it over the filter and sticker. Try to make sure
the area you use hasn’t been touched or you might transfer oil from your fingers to the filter. Gently
press down to fix the sticker in place. Now is a good time to clean the filter if required.
Note: Make sure
the sticker is perfectly flat with no lifted edges and trim any excess that hangs over the side. An
incorrectly applied sticker may make inserting and removing the filter tray more difficult. Spare
stickers are provided in case you need to re-apply.
